Geoff,
[*]My 350 is #393 which has a Kubota based Universal M-35B engine.
Ken Rollins
CKARMA IV
Search found 5 matches
- Sun Aug 21, 2022 11:55 am
- Forum: Add-ons and Improvements
- Topic: Number of C350 Mark 1 and Mark 2
- Replies: 3
- Views: 849
- Fri Mar 11, 2022 1:29 pm
- Forum: Rigging Forum
- Topic: Port light gaskets
- Replies: 2
- Views: 736
Port light gaskets
CKARMA4, my 2006 350 #393 was leaking at the port light seals. I ordered new seals from Lewmar which were obviously bigger than the old seals. I found out they changed the seals in 2007 and they do not stock the old seals. They recommended that I shim out the catch block on the latch. This did not w...
- Tue Nov 24, 2020 9:52 pm
- Forum: Rigging Forum
- Topic: Mainsheet Clamcleat
- Replies: 11
- Views: 2208
Re: Mainsheet Clamcleat
I replaced the camcleat on CKARMA 393 8 years ago when it let go in a 20 knot wind and the boom knocked me overboard. I put the Sheet through a line stopper.
- Sun May 12, 2019 11:15 am
- Forum: Electrical and Electronics Forum
- Topic: Raymarine ST60 TriData - need replacement
- Replies: 8
- Views: 4063
Re: Raymarine ST60 TriData - need replacement
Barbara,
Did you find any spare leftover ST60 equipment? My Smart Pilot Controller ST6001 recently developed a dark screen and I am looking for a replacement. Raymarine no longer supplies parts for this obsolete model.
Ken Rollins
CKARMAIV
2006 #393
Did you find any spare leftover ST60 equipment? My Smart Pilot Controller ST6001 recently developed a dark screen and I am looking for a replacement. Raymarine no longer supplies parts for this obsolete model.
Ken Rollins
CKARMAIV
2006 #393
- Mon Dec 18, 2017 12:01 pm
- Forum: Hull, Prop, and Rudder Forum
- Topic: Prop replacement
- Replies: 48
- Views: 20046
Re: Prop replacement
Jim, I have had a Max prop on my 350 #393 since I purchased it in 2006. It works very well,cruise at 6 knots at 2400 with no headwind, and great reverse. The one drawback is repair, it is very expensive. I used a standard prop while my max prop was being repaired and my speed under power was just as...