Hi Don,
I thought I could attach a picture easier here in the forums rather than on the mailing list.
Here is a photo of the boom and the blocks.
Hope this helps.
http://s184.photobucket.com/albums/x7/r ... 10080A.jpg
Attn Don jones: photo of boom blocks
Moderator: KenKrawford
-
- Posts: 233
- Joined: Fri Jan 20, 2006 2:04 pm
- Location: Ontario, Canada
Attn Don jones: photo of boom blocks
Ralph
WOLFHELM
C350 #342
WOLFHELM
C350 #342
-
- Posts: 36
- Joined: Tue Jan 22, 2008 7:03 pm
- Location: Oak Island / Southport, NC
Thanks to everyone for the rigging photos. I've spoken with Garhauer and ordered the items obviously missing, mainly some shackles, along with that special "D" shackle on the twin mid-boom blocks.
My current research is inspecting all the standing rigging to see if anything needs to be replaced before the mast goes back up. We plan to re-wire everything, and change out all the lines..
Thanks again,
Don Jones
#13 (no name yet)
Oak Island / Southport, NC
My current research is inspecting all the standing rigging to see if anything needs to be replaced before the mast goes back up. We plan to re-wire everything, and change out all the lines..
Thanks again,
Don Jones
#13 (no name yet)
Oak Island / Southport, NC