Catalina 350 International Association

Can anyone tell me how they screwed in the cockpit table? The table came with 1 1/4" machine screws - Is this right? No bolts or washers - just drill a hole and screw them in? Thanks, Joe Sorry, I couldn't reply sooner. There are two metal plates embedded in the cockpit sole. If you center the...

So say we all. Thanks Ken.

Good evening, As many of us have found, the only way to solve this problem is to add panels of insulation to the interior of the refrigerator. Even though this is not real easy since you have to work through small openings, you actually will spend less time than all the other fixes you will try. Dav...

You do not seem to have the same strainer. The Shurflo has a clear a plastic bowl about 2 1/2 inches in diameter by 4 inches long. The metal strainer is about 1 1/4 inches by 3 inches. I have no problem with stray current or zincs, --just the strainers. I guess the metal in the strainer is inferior ...

I have the same problem. Started when the boat was ~2 years old on #377.

Has anyone else found that the screens in the Shurflo strainers (Head and AC intakes) quickly corrode and discovered a good solution? West Marine carries the screens (part #7925308), but I find the screens only last about a month or two. I'm thinking about replacing the Shurflos with something else....

Hi Ken,
I too would like a copy of your material.

David Johnson, #377
callinectes@ec.rr.com

We also had the same problem, the dealer replaced the board through Catalina.

David
#377

Thanks.

On mine, the chirping has happened when the rpms have been between 2500-2800. Changing the speed doesn't stop the chriping.

What were your RPMs?

Engine Alarm, intermittent buzzing

Has anyone experienced the engine alarm buzzing or chirping intermittently after the engine is warm. The temperature and oil pressure seem to be fine, and so far a mechanic has not been able to find the problem.

David Johnson
#377

Has anyone found suitable LED replacement products for the various interior lights, or for the anchor light?

Any leads on replacements that worked well would be appreciated.

David
#377

Does anyone have the cross referenced part numbers for FRAM, NAPA, Gates, etc. for the following Universal 35B part numbers?

v-belt: 030475
fuel filter: 298854
oil filter: 036918
or the impeller kit: 200175

Thanks