Catalina 350 International Association

Location changes from year to year. Catalina Yachts emailed me. Thats how I found out about it.

I’m going to the Catalina rendezvous on Block Island. I’m going to raise this question and see what I can dig up. Then post what I learn.

Checkout this article on concrete and salt waterhttps://www.pondarmor.com/salt-water-corrosion- ... -concrete/
I’d have a diver inspect it and the chain.
Consider installing a new mooring anchor.

I searched the forum and did not find any information on whether anyone found it necessary or recommended the installation of an oversized backing plate to secure their mooring cleats (on either side of the bow)? Maybe the stock backing plate is good enough. I am not even sure how I can gain access ...

Went with the hot 18-gauge grey wire. Sump working fine. With 12 volts and less than 7 ft length, it can carry as much as 5 amps. More than enough current capacity for the sump.

Switch had two gray wires, pump had a brown and black wire, boat had brown and black wire. Brown from pump went to one of the grey wires on the switch, black from pump to black from boat, the other gray wire from switch to brown from boat. I used white GE bathroom silicone caulk to caulk the wires ...