Search found 6 matches

by jreinhold
Mon Jun 07, 2021 1:33 pm
Forum: Electrical and Electronics Forum
Topic: Shore Power Alternating Current Main Panel
Replies: 4
Views: 1447

Re: Shore Power Alternating Current Main Panel

Just wanted to follow up on what I found out based on the information you guys provided. While I have not had the time to confirm it by plugging in, it appears that the second outlet does in fact go only to the Air Conditioner. The wiring diagram supports this and, although it is a bit hard to see, ...
by jreinhold
Tue Jun 01, 2021 8:37 pm
Forum: Electrical and Electronics Forum
Topic: Shore Power Alternating Current Main Panel
Replies: 4
Views: 1447

Shore Power Alternating Current Main Panel

Hello all, Still getting used to my 350, hull number 332. I was looking at the shore power AC panel today. My last boat, a Beneteau 343, also had two shore power outlets, but each outlet had a dedicated panel with a set of circuits on them. Shore power 1 was water heater, battery charger and AC outl...
by jreinhold
Wed May 26, 2021 11:29 am
Forum: Rigging Forum
Topic: Maxwell 800 Windlass
Replies: 8
Views: 2233

Re: Maxwell 800 Windlass

Thanks to all for your thoughts and comments. I got a seal kit from Defender and replaced them last weekend. Reinstalled everything and it actually worked! No leak after several days! I will say the hardest part is the unknown while taking out the old seals, particularly the first. Trying to be care...
by jreinhold
Sun May 16, 2021 1:53 pm
Forum: Rigging Forum
Topic: Maxwell 800 Windlass
Replies: 8
Views: 2233

Re: Maxwell 800 Windlass

Thanks all for your thoughts and advice. I'm in NJ, does anyone know if there is a dealer where I can get the rebuild kit?

I see that I've come to the right place!

Thanks,
Jim
Tranquility #332
by jreinhold
Sat May 15, 2021 9:43 am
Forum: Head Forum
Topic: Fresh and sea water to electric toilet
Replies: 4
Views: 3638

Re: Fresh and sea water to electric toilet

I've used the shower to do a quick rinse of the bowl on the 350 we bought in the fall. But I recently opened the through hull for the head intake and heard quick a sucking sound, indicating the pump was pulling suction on the through hull. This concerns me both from the constant pressure on the thro...
by jreinhold
Sat May 15, 2021 9:33 am
Forum: Rigging Forum
Topic: Maxwell 800 Windlass
Replies: 8
Views: 2233

Maxwell 800 Windlass

Hello all. Been a member since the start of the year and have my first question to ask of the group, I'm certain there are many more to follow. I have a Maxwell VW800 windlass on the 350 I bought late last year, hull number 332. I opened the access panel over the V-berth to inspect the windlass, and...