A C350 needs a port side stern pulpit replacement. It is available on Catalina Direct, however it can only be purchased with both starboard and port stern pulpits. By any chance, does someone have a port pulpit? Or, does anybody need a starboard pulpit if we have to buy both?
Stern pulpit replacement
Moderator: KenKrawford
Stern pulpit replacement
Wally & Coco Conway
, #467
Pensacola, Florida
, #467
Pensacola, Florida
Re: Stern pulpit replacement
Wally,
Depending on how severe the damage is, you may want to see if it can be repaired. A few years ago, our slip neighbor hung his anchor on our stern pulpit as he was leaving and bent the forward section of the pulpit. A welder was able to cut out the bent section and weld in a new piece and even I cannot tell where the repair is and I know where to look for it. I believe it cost me about $800 9 or 10 years ago.
Good Luck
Depending on how severe the damage is, you may want to see if it can be repaired. A few years ago, our slip neighbor hung his anchor on our stern pulpit as he was leaving and bent the forward section of the pulpit. A welder was able to cut out the bent section and weld in a new piece and even I cannot tell where the repair is and I know where to look for it. I believe it cost me about $800 9 or 10 years ago.
Good Luck
Gary & Janet
The Best of Times (Hull #422)
The Best of Times (Hull #422)
Re: Stern pulpit replacement
Thanks, it is not repairable unfortunately.
Wally & Coco Conway
, #467
Pensacola, Florida
, #467
Pensacola, Florida