No the pump is not bronze
The replacement pumps for main engine are just like a car engine for fresh water.
I have found that going the tractor engine Kouboa route saves a ton of money such injectors, gaskets, seals, etc
Good Luck, and Cheers
Winddancer 0011 2002
Search found 10 matches
- Mon Apr 29, 2024 6:06 pm
- Forum: Engine / Transmission Forum
- Topic: Fresh Water (Coolant) Impeller?
- Replies: 17
- Views: 787
- Mon Apr 29, 2024 7:57 am
- Forum: Engine / Transmission Forum
- Topic: Fresh Water (Coolant) Impeller?
- Replies: 17
- Views: 787
Re: Fresh Water (Coolant) Impeller?
I have had very good luck with Kumar Brothers USA this part as I carry two spare.
Cost a few years back $ 106.00
Cheers
Cost a few years back $ 106.00
Cheers
- Wed Aug 24, 2022 11:34 am
- Forum: Engine / Transmission Forum
- Topic: Alarm buzzer mystery
- Replies: 14
- Views: 2503
Re: Alarm buzzer mystery
Hi Harry, If I recall correctly, when I first turn my key on, I get the constant beep-beep. If I move my key further over to the glow plug position, I don't have any sound. I'm heading back to the boat this w/e, so I can verify that if you wish... Since my boat is in South Carolina, I seldom, if ev...
- Mon Apr 18, 2022 5:26 pm
- Forum: Engine / Transmission Forum
- Topic: Exhaust Hose loop
- Replies: 5
- Views: 783
Re: Exhaust Hose loop
Steve
The drawings came with the kit to level the muffler…
You should be able to contact Catalina for that change…
Catalina supplied a chair to place under muffler with instructions.
Cheers
The drawings came with the kit to level the muffler…
You should be able to contact Catalina for that change…
Catalina supplied a chair to place under muffler with instructions.
Cheers
- Sat Apr 16, 2022 8:21 am
- Forum: Engine / Transmission Forum
- Topic: Exhaust Hose loop
- Replies: 5
- Views: 783
Re: Exhaust Hose loop
Steve Catalina’s Drawing 53001-4 Engine Exhaust System Retrofit Kit… dated 04/12/04 revised 11/23/05 shows loop to be 35” from top of hose at muffler to bottom of loop… and that the Muffler Modification per Catalina… drawing dated 11/14/05 be installed to level muffler and install Drain Screw Don Mo...
- Fri Apr 23, 2021 6:29 pm
- Forum: Interior Forum
- Topic: Leak at base of main bulkhead
- Replies: 9
- Views: 2191
Re: Leak at base of main bulkhead
I had the same issue and found the water seeping from shower pan adjacent the bulkhead wall.
I cleaned out the old caulk and re-caulked which solved the problem
Wind Dancer
Haul 0011
I cleaned out the old caulk and re-caulked which solved the problem
Wind Dancer
Haul 0011
- Sun Sep 27, 2020 8:43 am
- Forum: Electrical and Electronics Forum
- Topic: who makes our electrical engine gauge
- Replies: 2
- Views: 1055
Re: who makes our electrical engine gauge
Seaward supplied the panel and Dennis Digarashi was in charge of the design. It has been several years since talking with him, but he made me a complete new panel. His contact number is 626-374-6422.
Wind Dancer
Hull 11
Wind Dancer
Hull 11
- Fri Nov 23, 2018 6:24 pm
- Forum: Electrical and Electronics Forum
- Topic: Scanstrut radar mount on mast.
- Replies: 6
- Views: 3915
Re: Scanstrut radar mount on mast.
Just wanted to add that I mounted a Ray Hi Def
On a Scanstrut Backstay and love it.
I did a mast mount on my 34 MkII and that OK unless
You have to work on the Radar.
On my 350 with Gimbal backstay mount it doesn’t
Interfere with the sails and the radar works Great.
Wind Dancer Haul 0011
On a Scanstrut Backstay and love it.
I did a mast mount on my 34 MkII and that OK unless
You have to work on the Radar.
On my 350 with Gimbal backstay mount it doesn’t
Interfere with the sails and the radar works Great.
Wind Dancer Haul 0011
- Wed Oct 03, 2018 5:37 pm
- Forum: Rigging Forum
- Topic: Standing Rigging Replacement
- Replies: 6
- Views: 4436
Re: Standing Rigging Replacement
Our C350, hull # 011 had a complete refit last year.
Glad I did because it gave me a chance to inspect everything. II did everything myself with the help from Rigging Only. Great and knowledge company.
Doing the job myself didn’t cost that much and the piece of mind is worth it.
Glad I did because it gave me a chance to inspect everything. II did everything myself with the help from Rigging Only. Great and knowledge company.
Doing the job myself didn’t cost that much and the piece of mind is worth it.
- Sat Feb 17, 2018 11:54 am
- Forum: Interior Forum
- Topic: Solon cushions
- Replies: 0
- Views: 2632
Solon cushions
2003 Hull 11 complete set of cushions in really good conditions.
These cushions are the original factory cloth in a blue color for $300
Wind Dances
These cushions are the original factory cloth in a blue color for $300
Wind Dances