Catalina 350 International Association

I have a small dining table for sale for $50 or an offer. I found it ideal for its intended purpose. Several pictures are attached. I live in the Illinois/ Milwaukee area. 312-259-4492 Shaun Skimsail@aol.com Ps, will send you pictures if interested. Haven't figured out how to reduce the size for att...

I used to be at the Southgate marina with 390 and 350 later. Anyway, the Battery and bulb store on rt50 in Kenosha carries 4D batteries ($150) that I used and really liked them. While AGM technology works well for some folks, I believe in checking the inner status of battery, i.e., sg. The last 2 I ...

One way to do it is to connect the timer to the two terminals that lead to the compressor (condenser) motor, where you have both negative and the compressor run wire. You can use a vom or a 12volt light bulb to see which wire comes on when the compressor kicks on as the thermostat calls for it to ru...

I actually don't know the answer. In a general engineering norm and I was an engineer, 0.026 or something less than 1/32" play on a shaft this big in a nylon bushing is not excessive at all, especially it's submerged in water (good lubricant) and very slow moving surfaces. I will be very happy ...

I am new to 350 and have no experience on the boat. In general,  however, if you hear no clicking noise, I would test the engine starter solenoid first, that's mounted on the starter motor itself. It has 3 terminals: one heavy terminal that's connected to a battery,  similarly heavy one to the start...