Catalina 350 International Association

Hi Dave,
I had mine done last year and the service engineer ordered a 3 metre length which worked out fine.

Cheers, Richard
Nancy Scott #439

Hi Dennis, I had spares supplied by Sea Tech in 2008 and the manufacturer appears to be https://www.ssicustomplastics.com/

Richard Jenkins
Nancy Scott
C350 439

Lacking the skill of hand of other contributors I repurposed a French marine store table top I bought some years ago and had our local shipwright provide a boxed cover for the supports which provides some useful extra stowage, albeit constrained somewhat to bottles and cans or other more linear item...

I had one mounted on Nancy Scott C439 some years ago and it works fine. My memory of the install was not about any difficulties with the scanstrut and the raymarine radar but rather squeezing the extra cables in at the base of the mast and through to the boat when we put the mast back.

Many thanks. That's most helpful for the cabin deckhead lights, especially the photo of the led. I will try again with mine and hopefully with more success than when I tried to separate the black plastic rings! The toggle switch I was having problems with is the potted one incorporated in the light ...

I share the frustration. My cabin deckhead lights remain to be understood and the bulkhead ones seem to have toggle switches that can't be repaired or changed. It seems a shame to have to change the fittings; expensive to change all of them and unmatched if only the defective ones are changed. I wou...

Mine are Navman, but look similar to the Raymarine ST60 units, and I access them by removing the compass and unscrewing the plastic retaining ring at the back of the unit. Hope it is as easy for the ST60s.

Agree, these are difficult fittings and I too would be grateful for info. There should be no problem with compatibility with led lights if only one can work out how to replace them in these fittings. I have only been able to put leds into the light fittings on the saloon sides (they work well) but h...

I put one in as soon as possible after purchase in 2007 and have been very pleased with the performance. One key issue was getting power to the thruster and reeving heavy cables for the considerable current needed was considered a no no. I put a battery in the forward compartment under the fwd doubl...