Catalina 350 International Association

Dear Roost,

I have an extra that I am not using. Contact me off-line and let's work something out.

Mark
Bali Hai #143
Pasadena, MD Chesapeake Bay
443-812-2973

I've been looking at Rakego supports after seeing them on a friend's Hunter. Haven't found a source in US-they are made in Sweden.

Mark
Bali Hai
#143 2004

This leak is on the port side about halfway between the port light and the nav station. It starts up near the hull/deck joint. It is not near a stantion location. I noticed a small stain last fall but it worsened over the winter. As you can see in the pics it appears to originate near a bolt which I...

I've had some control issues with my 11 year old Westerbeke unit. New electrical control box is about $650. All new Marin Aire 16,000 btu is $1500. Anyone install or upgrade A/C with advice? Thanks

Hi all I've sailed #143 out of Baltimore for almost 4 years. PO never took Catalina up on prop exchange so I had 15x9 and cavitation issues. At last years haul out I replaced cutlass and while I had the time, repitched the prop. Local shop made it a 14x10 for $180 which was far better than purchasin...

Anyone using whisker pole with 155 genny? I'm ready to rig - had the pole from a previous boat - but the lower shroud looks like it will keep the pole from being perpendicular to the boat. Seems limiting.

Ideas or advice?
Mark

Hi all,
I have more than my share of manuals for the 350 and 35b, but don't seem to see a detailed 12volt schematic. The 120vac is included and I have the basic schematic for the 12v starting and charging system, but nothing about how the panel is wired or the windlass, etc. Anyone know if it exists?